Looking for a 65x100x12 shaft seal? The Oil Seal 65x100x12 FKM TC is a spring-loaded TC profile in FKM – Viton, made for 65 mm shafts and 100 mm bores.
Specifications
| Inner diameter (shaft) | 65 mm |
| Outer diameter (bore) | 100 mm |
| Width | 12 mm |
| Seal type | TC — double lip, rubber covered, garter spring |
| Material | FKM – Viton |
| Temperature range | -20 °C … +200 °C |
About the TC profile
The TC profile is the most widely used rotary shaft seal design: a rubber-covered outer shell that presses into the housing bore, a spring-loaded primary lip that retains the lubricant, and a secondary dust lip that keeps contamination away from the sealing edge.
Material: FKM – Viton
FKM (Viton®) keeps sealing where NBR gives up: continuous heat, hot oils, fuels and many aggressive chemicals. It is the right choice near engines, in hot gearboxes and wherever elevated temperature ages ordinary rubber within months. Note that FKM is not recommended for hot water or steam service.
Measure the shaft where the lip rides, not the old seal — worn rubber always reads small.
Ordering & delivery
- Sold per piece — no minimum order, priced in US dollars.
- Prices exclude any import duties or taxes; if your customs authority charges them, they are the buyer’s responsibility.
- One flat shipping rate worldwide · tracking number by email.
- Not sure this is the right size? See how to measure an oil seal, or send us your dimensions — pre-sale size checks are free.
Reviews
There are no reviews yet.