The right 10x35x8 shaft seal for the job: the Oil Seal 10x35x8 NBR TC is a spring-loaded TC lip seal, 10x35x8 mm, in oil-resistant NBR nitrile — built for 10 mm shafts and 35 mm bores found in micro motors, angle grinders, cooling pumps and compact gear reducers.
Size and material details
| Inner diameter (shaft) | 10 mm |
| Outer diameter (bore) | 35 mm |
| Width | 8 mm |
| Seal type | TC — double lip, rubber covered, garter spring |
| Material | NBR – Nitrile |
| Temperature range | -30 °C … +100 °C |
Why the TC profile is so widely used
As a TC-pattern seal it seals in two stages: a primary spring-loaded lip holds the oil film on the shaft, while a second lip fends off dust and water spray; the rubber-covered case keeps the whole unit anchored in the bore.
About the NBR nitrile compound
Nitrile rubber (NBR) is the workhorse of oil sealing: fully compatible with mineral oils, lubricating greases and common hydraulic fluids — the media found in most gearboxes and motors. Avoid contact with brake fluid, and keep spares shaded from sunlight.
If your shaft measures a few tenths of a millimetre under the nominal size, that is normal — the sealing lip is designed with interference for exactly that.
Purchase and delivery notes
- Sold per piece — no minimum order, priced in US dollars.
- Prices exclude any import duties or taxes; if your customs authority charges them, they are the buyer’s responsibility.
- One flat shipping rate worldwide · tracking number by email.
- To confirm this is the right size, see how to measure an oil seal, or send us your dimensions — pre-sale size checks are free.
Reviews
There are no reviews yet.