Find a seal by dimensions
Fill in any of the three dimensions — leave the rest blank. All values in millimetres.
Three steps to the right seal
Measure shaft & bore
Take the shaft diameter, the housing bore diameter and the width of the old seal. Three numbers are all you need.
Pick the compound
NBR covers most oils and greases. Choose FKM for heat, EPDM for water and steam, PTFE for the toughest media.
Order from stock
Add a single piece or a full box to your cart. Parcels leave our warehouse within two working days.
Seal designs we stock
TC — double lip, spring loadedThe everyday rotary shaft seal
A rubber-covered seal with a primary sealing lip and a dust lip behind it. Handles oil and grease retention in gearboxes, motors and pumps.
Browse TC sizes →TG — reinforced double lipFor harsher working conditions
A sturdier profile that copes with higher shaft speeds, pressure spikes and dusty surroundings common in agricultural machinery.
Browse TG sizes →SC — single lip with springClean, low-friction setups
One sealing lip, no dust lip. Lower friction makes it a good fit where contamination is minimal and drag must stay low.
Browse SC sizes →V-Rings — axial face sealsStretch-on protection
An all-rubber ring that rides on the shaft and seals against a counterface. Keeps dust, fibres and splash water away from the main seal.
Browse V-Rings →Which rubber do you need?
A quick comparison — full datasheets are on the material guide page.
| Compound | Temperature range | Works well with | Keep away from |
|---|---|---|---|
| NBR · Nitrile | -30 °C … +100 °C | Mineral oils, greases, hydraulic fluids | Brake fluid, ozone, strong sunlight |
| FKM · Viton | -20 °C … +200 °C | Hot oil, fuels, many chemicals | Hot water, steam, ketones |
| EPDM | -40 °C … +130 °C | Water, steam, glycol brake fluid | Any mineral oil or grease |
| PTFE · Teflon | -90 °C … +260 °C | Almost every medium, dry running | — (premium price) |
Inspected before dispatch
Every batch is checked for lip damage and dimension drift before it goes on the shelf.
Plain, honest pricing
The price you see next to a size is the price you pay — no hidden handling fees at checkout.
Humans on the other end
Email us a photo of your old seal and we will identify it — usually within one working day.
Metric oil seals, listed by size — nothing else to figure out
Rotary shaft seals are simple components with a simple naming logic: shaft diameter, bore diameter, width. Oil-SEAL lists its entire warehouse that way, so instead of decoding manufacturer part numbers you can search 20,000+ metric sizes directly and see live stock before you order.
Our range covers TC, TG, SC and VC profiles in NBR, FKM, EPDM and PTFE compounds, from 4 mm instrument shafts up to 300 mm industrial spindles. Maintenance teams in gearboxes, pumps, electric motors and farm machinery use us as a fast source for replacements — one piece is a perfectly normal order here.
If you only have an OEM part number from SKF, Freudenberg, NOK or Corteco, our free cross-reference service will match it to an equivalent seal from stock.