The Oil Seal 32x68x10 NBR TC (32x68x10 mm) renews the sealing on a 32 mm shaft where grease or oil must stay in and grit must stay out — a typical fitment in drive motors, planetary gearboxes, irrigation pumps and feed mixers.
Technical specifications
| Inner diameter (shaft) | 32 mm |
| Outer diameter (bore) | 68 mm |
| Width | 10 mm |
| Seal type | TC — double lip, rubber covered, garter spring |
| Material | NBR – Nitrile |
| Temperature range | -30 °C … +100 °C |
Inside the TC double-lip design
The TC arrangement — rubber-covered case, garter-spring main lip, external dust lip — is the industry’s go-to solution wherever a shaft spins in an oil-filled housing.
Material: NBR – Nitrile
This is an NBR-nitrile seal — the everyday elastomer for oil-lubricated equipment, compatible with mineral oils, greases and hydraulic media. For longest life, avoid brake fluid contact and store spares away from direct sunlight.
Don’t worry if your micrometer shows the shaft a few tenths under size — the garter-sprung lip is designed to seal against exactly that condition.
Order details
- Price is for 1 piece — order any quantity, no minimum; listed in US dollars.
- Any import duty or tax imposed by your country is the buyer’s responsibility and excluded from our prices.
- Flat-rate shipping to every country · tracking number sent by email.
- For a size check, How to measure an oil seal walks you through it, or send us your dimensions for free advice.
Reviews
There are no reviews yet.