Built to 60x75x12 mm (ID 60 / OD 75 / width 12), the Oil Seal 60x75x12 NBR TC gives 60 mm shafts a fresh, leak-free seal in the 75 mm housings of industrial gearboxes, conveyors and mid-size rotating equipment.
Technical specifications
| Inner diameter (shaft) | 60 mm |
| Outer diameter (bore) | 75 mm |
| Width | 12 mm |
| Seal type | TC — double lip, rubber covered, garter spring |
| Material | NBR – Nitrile |
| Temperature range | -30 °C … +100 °C |
Inside the TC double-lip design
The TC arrangement — rubber-covered case, garter-spring main lip, external dust lip — is the industry’s go-to solution wherever a shaft spins in an oil-filled housing.
NBR nitrile rubber at a glance
The compound is NBR nitrile, selected for oil-and-grease compatibility across motors, reducers and pumps. Note the limits: brake fluid degrades nitrile, and sunlight ages stored rubber — so store spares dark and dry.
Should the shaft read slightly below the listed size — typically a few tenths of a millimetre — no concern: the lip’s interference fit accounts for it.
Buying & shipping information
- Price is for 1 piece — order any quantity, no minimum; listed in US dollars.
- Any import duty or tax imposed by your country is the buyer’s responsibility and excluded from our prices.
- Flat-rate shipping to every country · tracking number sent by email.
- For a size check, How to measure an oil seal walks you through it, or send us your dimensions for free advice.
Reviews
There are no reviews yet.