The Oil Seal 56x75x8 NBR TC (56x75x8 mm) renews the sealing on a 56 mm shaft where grease or oil must stay in and grit must stay out — a typical fitment in heavy-duty gearboxes, conveyor drums and large pump shafts.
Specifications
| Inner diameter (shaft) | 56 mm |
| Outer diameter (bore) | 75 mm |
| Width | 8 mm |
| Seal type | TC — double lip, rubber covered, garter spring |
| Material | NBR – Nitrile |
| Temperature range | -30 °C … +100 °C |
Why the TC profile is so widely used
As a TC-pattern seal it seals in two stages: a primary spring-loaded lip holds the oil film on the shaft, while a second lip fends off dust and water spray; the rubber-covered case keeps the whole unit anchored in the bore.
About the NBR nitrile compound
The compound is NBR nitrile, selected for oil-and-grease compatibility across motors, reducers and pumps. Note the limits: brake fluid degrades nitrile, and sunlight ages stored rubber — so store spares dark and dry.
Should the shaft read slightly below the listed size — typically a few tenths of a millimetre — no concern: the lip’s interference fit accounts for it.
Order details
- Sold individually — buy one or one hundred, all prices in USD.
- Where customs charges duties or taxes on entry, the buyer covers them; they are not part of our pricing.
- Ships worldwide at one flat rate · tracking number provided by email.
- For sizing help, use how to measure an oil seal or send us your dimensions — free pre-sale checks.
Reviews
There are no reviews yet.