The 55x78x8 mm Oil Seal 55x78x8 NBR TC keeps lubricant circulating where it belongs — inside the housing — on the 55 mm shafts and 78 mm bores typical of steel-plant gearboxes, screw conveyors and big-bore rotating shafts.
Specifications
| Inner diameter (shaft) | 55 mm |
| Outer diameter (bore) | 78 mm |
| Width | 8 mm |
| Seal type | TC — double lip, rubber covered, garter spring |
| Material | NBR – Nitrile |
| Temperature range | -30 °C … +100 °C |
How the TC design works
Every TC seal combines three elements: a rubber-covered case that grips the bore, a spring-loaded sealing lip that follows shaft runout, and a dust lip that shields the main lip from contamination.
NBR nitrile rubber at a glance
Nitrile rubber (NBR) is the workhorse of oil sealing: fully compatible with mineral oils, lubricating greases and common hydraulic fluids — the media found in most gearboxes and motors. Avoid contact with brake fluid, and keep spares shaded from sunlight.
Should the shaft read slightly below the listed size — typically a few tenths of a millimetre — no concern: the lip’s interference fit accounts for it.
Ordering & delivery
- Price is for 1 piece — order any quantity, no minimum; listed in US dollars.
- Any import duty or tax imposed by your country is the buyer’s responsibility and excluded from our prices.
- Flat-rate shipping to every country · tracking number sent by email.
- For a size check, How to measure an oil seal walks you through it, or send us your dimensions for free advice.
Reviews
There are no reviews yet.