Built to 55x68x8 mm (ID 55 / OD 68 / width 8), the Oil Seal 55x68x8 NBR TC gives 55 mm shafts a fresh, leak-free seal in the 68 mm housings of industrial gearboxes, conveyors and mid-size rotating equipment.
Technical specifications
| Inner diameter (shaft) | 55 mm |
| Outer diameter (bore) | 68 mm |
| Width | 8 mm |
| Seal type | TC — double lip, rubber covered, garter spring |
| Material | NBR – Nitrile |
| Temperature range | -30 °C … +100 °C |
How the TC design works
TC seals work with a triple defence — a rubber-coated case seating tightly in the bore, a main lip held against the shaft by a garter spring, and an outer dust lip that keeps abrasive particles away.
NBR nitrile rubber at a glance
Nitrile rubber (NBR) is the workhorse of oil sealing: fully compatible with mineral oils, lubricating greases and common hydraulic fluids — the media found in most gearboxes and motors. Avoid contact with brake fluid, and keep spares shaded from sunlight.
Should the shaft read slightly below the listed size — typically a few tenths of a millimetre — no concern: the lip’s interference fit accounts for it.
Ordering & delivery
- Sold per piece — no minimum order, priced in US dollars.
- Prices exclude any import duties or taxes; if your customs authority charges them, they are the buyer’s responsibility.
- One flat shipping rate worldwide · tracking number by email.
- To confirm this is the right size, see how to measure an oil seal, or send us your dimensions — pre-sale size checks are free.
Reviews
There are no reviews yet.