Sized 52x78x10 mm (inner × outer × width), the Oil Seal 52x78x10 NBR TC seals a 52 mm shaft running in a 78 mm bore. This size turns up often in large reducers, belt-conveyor pulleys, slurry pumps and construction machinery.
Size and material details
| Inner diameter (shaft) | 52 mm |
| Outer diameter (bore) | 78 mm |
| Width | 10 mm |
| Seal type | TC — double lip, rubber covered, garter spring |
| Material | NBR – Nitrile |
| Temperature range | -30 °C … +100 °C |
About the TC profile
Three features define the TC type: the rubber outer case that fills small bore imperfections, the garter-spring-loaded lip that maintains contact under runout, and the auxiliary lip that acts as a dirt barrier.
Why NBR for this seal
The seal lip is moulded from NBR, a nitrile rubber prized for resistance to mineral oil, grease and hydraulic fluids — the default elastomer for general machinery. It should not meet brake fluid, and stored spares fare best away from UV light.
Measuring your shaft a few tenths under the nominal figure is expected; the spring-loaded lip is built to seal with that small interference.
Purchase and delivery notes
- Price is for 1 piece — order any quantity, no minimum; listed in US dollars.
- Any import duty or tax imposed by your country is the buyer’s responsibility and excluded from our prices.
- Flat-rate shipping to every country · tracking number sent by email.
- For a size check, How to measure an oil seal walks you through it, or send us your dimensions for free advice.
Reviews
There are no reviews yet.