A 50x62x10 mm TC double-lip seal moulded in NBR nitrile rubber: the Oil Seal 50x62x10 NBR TC restores tight sealing on 50 mm shafts and 62 mm bores used in large reducers, belt-conveyor pulleys, slurry pumps and construction machinery.
Specifications
| Inner diameter (shaft) | 50 mm |
| Outer diameter (bore) | 62 mm |
| Width | 10 mm |
| Seal type | TC — double lip, rubber covered, garter spring |
| Material | NBR – Nitrile |
| Temperature range | -30 °C … +100 °C |
About the TC profile
TC is the standard rotary-shaft profile for good reason: a rubber OD seals the bore side, a spring-loaded lip seals the shaft side, and a dust lip extends service life in dirty environments.
Why NBR for this seal
The seal lip is moulded from NBR, a nitrile rubber prized for resistance to mineral oil, grease and hydraulic fluids — the default elastomer for general machinery. It should not meet brake fluid, and stored spares fare best away from UV light.
If your shaft measures a few tenths of a millimetre under the nominal size, that is normal — the sealing lip is designed with interference for exactly that.
Purchase and delivery notes
- Price is for 1 piece — order any quantity, no minimum; listed in US dollars.
- Any import duty or tax imposed by your country is the buyer’s responsibility and excluded from our prices.
- Flat-rate shipping to every country · tracking number sent by email.
- For a size check, How to measure an oil seal walks you through it, or send us your dimensions for free advice.
Reviews
There are no reviews yet.