The Oil Seal 50x60x8 NBR TC (50x60x8 mm) renews the sealing on a 50 mm shaft where grease or oil must stay in and grit must stay out — a typical fitment in steel-plant gearboxes, screw conveyors and big-bore rotating shafts.
Dimensions & specifications
| Inner diameter (shaft) | 50 mm |
| Outer diameter (bore) | 60 mm |
| Width | 8 mm |
| Seal type | TC — double lip, rubber covered, garter spring |
| Material | NBR – Nitrile |
| Temperature range | -30 °C … +100 °C |
Why the TC profile is so widely used
Three features define the TC type: the rubber outer case that fills small bore imperfections, the garter-spring-loaded lip that maintains contact under runout, and the auxiliary lip that acts as a dirt barrier.
Material: NBR – Nitrile
Nitrile rubber (NBR) is the workhorse of oil sealing: fully compatible with mineral oils, lubricating greases and common hydraulic fluids — the media found in most gearboxes and motors. Avoid contact with brake fluid, and keep spares shaded from sunlight.
Should the shaft read slightly below the listed size — typically a few tenths of a millimetre — no concern: the lip’s interference fit accounts for it.
Ordering & delivery
- Individual pieces, no minimum order — checkout in US dollars.
- Our prices do not cover customs duties or taxes your country may apply; those fall to the buyer.
- One worldwide flat shipping fee · every parcel tracked, number emailed.
- Before you buy, confirm the fit: measuring guide or free dimension check.
Reviews
There are no reviews yet.