One 42x78x10 mm part does the sealing: the Oil Seal 42x78x10 NBR TC wraps a 42 mm shaft in its spring-loaded lip and presses firmly into a 78 mm bore — the kind of fit seen across drive motors, planetary gearboxes, irrigation pumps and feed mixers.
Technical specifications
| Inner diameter (shaft) | 42 mm |
| Outer diameter (bore) | 78 mm |
| Width | 10 mm |
| Seal type | TC — double lip, rubber covered, garter spring |
| Material | NBR – Nitrile |
| Temperature range | -30 °C … +100 °C |
Inside the TC double-lip design
As a TC-pattern seal it seals in two stages: a primary spring-loaded lip holds the oil film on the shaft, while a second lip fends off dust and water spray; the rubber-covered case keeps the whole unit anchored in the bore.
NBR nitrile rubber at a glance
Made of NBR (acrylonitrile-butadiene rubber), the seal tolerates the mineral oils and lithium greases that lubricate most machinery. Standard practice: keep NBR away from brake fluid, and store unused seals in their bag, out of sunlight.
Measuring your shaft a few tenths under the nominal figure is expected; the spring-loaded lip is built to seal with that small interference.
Ordering & delivery
- Each listing is for one seal — no MOQ, all prices in US dollars.
- Import duties or taxes, if levied by your customs, are paid by the buyer and are not included in the price.
- Worldwide shipping at a single flat rate, with a tracking number emailed to you.
- To double-check the size, read how to measure an oil seal or contact us with your dimensions — size checks before purchase are free.
Reviews
There are no reviews yet.