The Oil Seal 38x68x8 NBR TC (38x68x8 mm) renews the sealing on a 38 mm shaft where grease or oil must stay in and grit must stay out — a typical fitment in electric motors, gearboxes, pumps and agricultural machinery.
Dimensions & specifications
| Inner diameter (shaft) | 38 mm |
| Outer diameter (bore) | 68 mm |
| Width | 8 mm |
| Seal type | TC — double lip, rubber covered, garter spring |
| Material | NBR – Nitrile |
| Temperature range | -30 °C … +100 °C |
How the TC design works
Its TC construction pairs a rubber-covered OD (a snug press-fit in the bore) with a spring-energised sealing lip and a separate dust lip, so both oil retention and contamination exclusion are covered.
Material: NBR – Nitrile
NBR nitrile rubber gives the lip its resistance to mineral oils, greases and hydraulic fluids — exactly the fluids a gearbox or pump seal meet. It is the industry’s general-purpose choice; just keep it clear of brake fluid and direct sun when storing.
Measuring your shaft a few tenths under the nominal figure is expected; the spring-loaded lip is built to seal with that small interference.
Purchase and delivery notes
- Price is for 1 piece — order any quantity, no minimum; listed in US dollars.
- Any import duty or tax imposed by your country is the buyer’s responsibility and excluded from our prices.
- Flat-rate shipping to every country · tracking number sent by email.
- For a size check, How to measure an oil seal walks you through it, or send us your dimensions for free advice.
Reviews
There are no reviews yet.