The Oil Seal 35x72x8 NBR TC combines a 35 × 72 × 8 mm envelope with the proven TC double-lip geometry, making it a dependable fix where electric motors, gearboxes, pumps and agricultural machinery need reliable shaft sealing.
Technical specifications
| Inner diameter (shaft) | 35 mm |
| Outer diameter (bore) | 72 mm |
| Width | 8 mm |
| Seal type | TC — double lip, rubber covered, garter spring |
| Material | NBR – Nitrile |
| Temperature range | -30 °C … +100 °C |
Inside the TC double-lip design
As a TC-pattern seal it seals in two stages: a primary spring-loaded lip holds the oil film on the shaft, while a second lip fends off dust and water spray; the rubber-covered case keeps the whole unit anchored in the bore.
Material: NBR – Nitrile
Made of NBR (acrylonitrile-butadiene rubber), the seal tolerates the mineral oils and lithium greases that lubricate most machinery. Standard practice: keep NBR away from brake fluid, and store unused seals in their bag, out of sunlight.
Measuring your shaft a few tenths under the nominal figure is expected; the spring-loaded lip is built to seal with that small interference.
Buying & shipping information
- Sold per piece — no minimum order, priced in US dollars.
- Prices exclude any import duties or taxes; if your customs authority charges them, they are the buyer’s responsibility.
- One flat shipping rate worldwide · tracking number by email.
- To confirm this is the right size, see how to measure an oil seal, or send us your dimensions — pre-sale size checks are free.
Reviews
There are no reviews yet.