The right 30x58x8 shaft seal for the job: the Oil Seal 30x58x8 NBR TC is a spring-loaded TC lip seal, 30x58x8 mm, in oil-resistant NBR nitrile — built for 30 mm shafts and 58 mm bores found in industrial motors, speed reducers, hydraulic pumps and farm equipment.
Dimensions & specifications
| Inner diameter (shaft) | 30 mm |
| Outer diameter (bore) | 58 mm |
| Width | 8 mm |
| Seal type | TC — double lip, rubber covered, garter spring |
| Material | NBR – Nitrile |
| Temperature range | -30 °C … +100 °C |
How the TC design works
As a TC-pattern seal it seals in two stages: a primary spring-loaded lip holds the oil film on the shaft, while a second lip fends off dust and water spray; the rubber-covered case keeps the whole unit anchored in the bore.
About the NBR nitrile compound
The compound is NBR nitrile, selected for oil-and-grease compatibility across motors, reducers and pumps. Note the limits: brake fluid degrades nitrile, and sunlight ages stored rubber — so store spares dark and dry.
If your shaft measures a few tenths of a millimetre under the nominal size, that is normal — the sealing lip is designed with interference for exactly that.
Order details
- Price is for 1 piece — order any quantity, no minimum; listed in US dollars.
- Any import duty or tax imposed by your country is the buyer’s responsibility and excluded from our prices.
- Flat-rate shipping to every country · tracking number sent by email.
- For a size check, How to measure an oil seal walks you through it, or send us your dimensions for free advice.
Reviews
There are no reviews yet.