The Oil Seal 28x56x8 NBR TC is a TC rotary shaft seal sized 28x56x8 mm (ID × OD × width). It keeps oil inside and dirt outside on a 28 mm shaft seated in a 56 mm bore — a size common in motor shafts, gearbox input stages, centrifugal pumps and tillers.
Dimensions & specifications
| Inner diameter (shaft) | 28 mm |
| Outer diameter (bore) | 56 mm |
| Width | 8 mm |
| Seal type | TC — double lip, rubber covered, garter spring |
| Material | NBR – Nitrile |
| Temperature range | -30 °C … +100 °C |
Inside the TC double-lip design
TC is the standard rotary-shaft profile for good reason: a rubber OD seals the bore side, a spring-loaded lip seals the shaft side, and a dust lip extends service life in dirty environments.
NBR nitrile rubber at a glance
NBR nitrile rubber gives the lip its resistance to mineral oils, greases and hydraulic fluids — exactly the fluids a gearbox or pump seal meet. It is the industry’s general-purpose choice; just keep it clear of brake fluid and direct sun when storing.
Should the shaft read slightly below the listed size — typically a few tenths of a millimetre — no concern: the lip’s interference fit accounts for it.
Order details
- Price is for 1 piece — order any quantity, no minimum; listed in US dollars.
- Any import duty or tax imposed by your country is the buyer’s responsibility and excluded from our prices.
- Flat-rate shipping to every country · tracking number sent by email.
- For a size check, How to measure an oil seal walks you through it, or send us your dimensions for free advice.
Reviews
There are no reviews yet.