Built to 28x42x10 mm (ID 28 / OD 42 / width 10), the Oil Seal 28x42x10 NBR TC gives 28 mm shafts a fresh, leak-free seal in the 42 mm housings of drive motors, planetary gearboxes, irrigation pumps and feed mixers.
Specifications
| Inner diameter (shaft) | 28 mm |
| Outer diameter (bore) | 42 mm |
| Width | 10 mm |
| Seal type | TC — double lip, rubber covered, garter spring |
| Material | NBR – Nitrile |
| Temperature range | -30 °C … +100 °C |
About the TC profile
Every TC seal combines three elements: a rubber-covered case that grips the bore, a spring-loaded sealing lip that follows shaft runout, and a dust lip that shields the main lip from contamination.
Material: NBR – Nitrile
This is an NBR-nitrile seal — the everyday elastomer for oil-lubricated equipment, compatible with mineral oils, greases and hydraulic media. For longest life, avoid brake fluid contact and store spares away from direct sunlight.
If your shaft measures a few tenths of a millimetre under the nominal size, that is normal — the sealing lip is designed with interference for exactly that.
Buying & shipping information
- Sold per piece — no minimum order, priced in US dollars.
- Prices exclude any import duties or taxes; if your customs authority charges them, they are the buyer’s responsibility.
- One flat shipping rate worldwide · tracking number by email.
- To confirm this is the right size, see how to measure an oil seal, or send us your dimensions — pre-sale size checks are free.
Reviews
There are no reviews yet.