The 25x62x7 mm Oil Seal 25x62x7 NBR TC keeps lubricant circulating where it belongs — inside the housing — on the 25 mm shafts and 62 mm bores typical of motor shafts, gearbox input stages, centrifugal pumps and tillers.
Dimensions & specifications
| Inner diameter (shaft) | 25 mm |
| Outer diameter (bore) | 62 mm |
| Width | 7 mm |
| Seal type | TC — double lip, rubber covered, garter spring |
| Material | NBR – Nitrile |
| Temperature range | -30 °C … +100 °C |
Inside the TC double-lip design
TC is the standard rotary-shaft profile for good reason: a rubber OD seals the bore side, a spring-loaded lip seals the shaft side, and a dust lip extends service life in dirty environments.
Material: NBR – Nitrile
This is an NBR-nitrile seal — the everyday elastomer for oil-lubricated equipment, compatible with mineral oils, greases and hydraulic media. For longest life, avoid brake fluid contact and store spares away from direct sunlight.
Measuring your shaft a few tenths under the nominal figure is expected; the spring-loaded lip is built to seal with that small interference.
Order details
- Every order is per piece with no MOQ; payments in US dollars.
- Prices exclude duties and taxes that your customs may assess — those are the buyer’s obligation.
- Flat worldwide shipping · email delivery of the tracking number.
- Double-check dimensions before ordering: how to measure an oil seal, or message us your size for a free check.
Reviews
There are no reviews yet.