Built to 25x60x7 mm (ID 25 / OD 60 / width 7), the Oil Seal 25x60x7 NBR TC gives 25 mm shafts a fresh, leak-free seal in the 60 mm housings of motor shafts, gearbox input stages, centrifugal pumps and tillers.
Dimensions & specifications
| Inner diameter (shaft) | 25 mm |
| Outer diameter (bore) | 60 mm |
| Width | 7 mm |
| Seal type | TC — double lip, rubber covered, garter spring |
| Material | NBR – Nitrile |
| Temperature range | -30 °C … +100 °C |
Why the TC profile is so widely used
As a TC-pattern seal it seals in two stages: a primary spring-loaded lip holds the oil film on the shaft, while a second lip fends off dust and water spray; the rubber-covered case keeps the whole unit anchored in the bore.
NBR nitrile rubber at a glance
Made of NBR (acrylonitrile-butadiene rubber), the seal tolerates the mineral oils and lithium greases that lubricate most machinery. Standard practice: keep NBR away from brake fluid, and store unused seals in their bag, out of sunlight.
Measuring your shaft a few tenths under the nominal figure is expected; the spring-loaded lip is built to seal with that small interference.
Purchase and delivery notes
- Sold per piece — no minimum order, priced in US dollars.
- Prices exclude any import duties or taxes; if your customs authority charges them, they are the buyer’s responsibility.
- One flat shipping rate worldwide · tracking number by email.
- To confirm this is the right size, see how to measure an oil seal, or send us your dimensions — pre-sale size checks are free.
Reviews
There are no reviews yet.