Sized 22x48x10 mm (inner × outer × width), the Oil Seal 22x48x10 NBR TC seals a 22 mm shaft running in a 48 mm bore. This size turns up often in small electric motors, power tools, pumps and instrument gearboxes.
Size and material details
| Inner diameter (shaft) | 22 mm |
| Outer diameter (bore) | 48 mm |
| Width | 10 mm |
| Seal type | TC — double lip, rubber covered, garter spring |
| Material | NBR – Nitrile |
| Temperature range | -30 °C … +100 °C |
Inside the TC double-lip design
As a TC-pattern seal it seals in two stages: a primary spring-loaded lip holds the oil film on the shaft, while a second lip fends off dust and water spray; the rubber-covered case keeps the whole unit anchored in the bore.
Material: NBR – Nitrile
Made of NBR (acrylonitrile-butadiene rubber), the seal tolerates the mineral oils and lithium greases that lubricate most machinery. Standard practice: keep NBR away from brake fluid, and store unused seals in their bag, out of sunlight.
Measuring your shaft a few tenths under the nominal figure is expected; the spring-loaded lip is built to seal with that small interference.
Buying & shipping information
- Price is for 1 piece — order any quantity, no minimum; listed in US dollars.
- Any import duty or tax imposed by your country is the buyer’s responsibility and excluded from our prices.
- Flat-rate shipping to every country · tracking number sent by email.
- For a size check, How to measure an oil seal walks you through it, or send us your dimensions for free advice.
Reviews
There are no reviews yet.