The 38x60x7 mm Oil Seal 38x60x7 NBR TC keeps lubricant circulating where it belongs — inside the housing — on the 38 mm shafts and 60 mm bores typical of AC motors, worm gearboxes, gear pumps and harvest machinery.
Size and material details
| Inner diameter (shaft) | 38 mm |
| Outer diameter (bore) | 60 mm |
| Width | 7 mm |
| Seal type | TC — double lip, rubber covered, garter spring |
| Material | NBR – Nitrile |
| Temperature range | -30 °C … +100 °C |
Why the TC profile is so widely used
TC seals work with a triple defence — a rubber-coated case seating tightly in the bore, a main lip held against the shaft by a garter spring, and an outer dust lip that keeps abrasive particles away.
About the NBR nitrile compound
The compound is NBR nitrile, selected for oil-and-grease compatibility across motors, reducers and pumps. Note the limits: brake fluid degrades nitrile, and sunlight ages stored rubber — so store spares dark and dry.
If your shaft measures a few tenths of a millimetre under the nominal size, that is normal — the sealing lip is designed with interference for exactly that.
Order details
- Price is for 1 piece — order any quantity, no minimum; listed in US dollars.
- Any import duty or tax imposed by your country is the buyer’s responsibility and excluded from our prices.
- Flat-rate shipping to every country · tracking number sent by email.
- For a size check, How to measure an oil seal walks you through it, or send us your dimensions for free advice.
Reviews
There are no reviews yet.