The Oil Seal 52x70x10 NBR TC (52x70x10 mm) renews the sealing on a 52 mm shaft where grease or oil must stay in and grit must stay out — a typical fitment in mining conveyors, industrial reducers, mixer shafts and rolling equipment.
Dimensions & specifications
| Inner diameter (shaft) | 52 mm |
| Outer diameter (bore) | 70 mm |
| Width | 10 mm |
| Seal type | TC — double lip, rubber covered, garter spring |
| Material | NBR – Nitrile |
| Temperature range | -30 °C … +100 °C |
Why the TC profile is so widely used
TC is the standard rotary-shaft profile for good reason: a rubber OD seals the bore side, a spring-loaded lip seals the shaft side, and a dust lip extends service life in dirty environments.
About the NBR nitrile compound
Made of NBR (acrylonitrile-butadiene rubber), the seal tolerates the mineral oils and lithium greases that lubricate most machinery. Standard practice: keep NBR away from brake fluid, and store unused seals in their bag, out of sunlight.
It is normal for a shaft to measure a few tenths of a millimetre smaller than nominal; the sealing lip is engineered to take up that difference.
Purchase and delivery notes
- Sold individually — buy one or one hundred, all prices in USD.
- Where customs charges duties or taxes on entry, the buyer covers them; they are not part of our pricing.
- Ships worldwide at one flat rate · tracking number provided by email.
- For sizing help, use how to measure an oil seal or send us your dimensions — free pre-sale checks.
Reviews
There are no reviews yet.