If your 48 mm shaft is weeping oil, the Oil Seal 48x58x7 NBR TC — a TC spring-loaded seal at 48x58x7 mm — restores the barrier between the 58 mm housing and the outside world. A staple size for mining conveyors, industrial reducers, mixer shafts and rolling equipment.
Technical specifications
| Inner diameter (shaft) | 48 mm |
| Outer diameter (bore) | 58 mm |
| Width | 7 mm |
| Seal type | TC — double lip, rubber covered, garter spring |
| Material | NBR – Nitrile |
| Temperature range | -30 °C … +100 °C |
About the TC profile
The TC layout brings three protections together: a rubber outer surface that grips the housing bore, a garter-spring lip that tracks slight shaft movement, and a secondary dust lip that blocks grit before it reaches the sealing edge.
About the NBR nitrile compound
The seal lip is moulded from NBR, a nitrile rubber prized for resistance to mineral oil, grease and hydraulic fluids — the default elastomer for general machinery. It should not meet brake fluid, and stored spares fare best away from UV light.
Don’t worry if your micrometer shows the shaft a few tenths under size — the garter-sprung lip is designed to seal against exactly that condition.
Order details
- Sold per piece — no minimum order, priced in US dollars.
- Prices exclude any import duties or taxes; if your customs authority charges them, they are the buyer’s responsibility.
- One flat shipping rate worldwide · tracking number by email.
- To confirm this is the right size, see how to measure an oil seal, or send us your dimensions — pre-sale size checks are free.
Reviews
There are no reviews yet.