The Oil Seal 35x55x10 NBR TC combines a 35 × 55 × 10 mm envelope with the proven TC double-lip geometry, making it a dependable fix where drive motors, planetary gearboxes, irrigation pumps and feed mixers need reliable shaft sealing.
Size and material details
| Inner diameter (shaft) | 35 mm |
| Outer diameter (bore) | 55 mm |
| Width | 10 mm |
| Seal type | TC — double lip, rubber covered, garter spring |
| Material | NBR – Nitrile |
| Temperature range | -30 °C … +100 °C |
How the TC design works
Its TC construction pairs a rubber-covered OD (a snug press-fit in the bore) with a spring-energised sealing lip and a separate dust lip, so both oil retention and contamination exclusion are covered.
About the NBR nitrile compound
The compound is NBR nitrile, selected for oil-and-grease compatibility across motors, reducers and pumps. Note the limits: brake fluid degrades nitrile, and sunlight ages stored rubber — so store spares dark and dry.
Should the shaft read slightly below the listed size — typically a few tenths of a millimetre — no concern: the lip’s interference fit accounts for it.
Order details
- Price is for 1 piece — order any quantity, no minimum; listed in US dollars.
- Any import duty or tax imposed by your country is the buyer’s responsibility and excluded from our prices.
- Flat-rate shipping to every country · tracking number sent by email.
- For a size check, How to measure an oil seal walks you through it, or send us your dimensions for free advice.
Reviews
There are no reviews yet.