The Oil Seal 38x75x12 NBR TC (38x75x12 mm) renews the sealing on a 38 mm shaft where grease or oil must stay in and grit must stay out — a typical fitment in drive motors, planetary gearboxes, irrigation pumps and feed mixers.
Size and material details
| Inner diameter (shaft) | 38 mm |
| Outer diameter (bore) | 75 mm |
| Width | 12 mm |
| Seal type | TC — double lip, rubber covered, garter spring |
| Material | NBR – Nitrile |
| Temperature range | -30 °C … +100 °C |
About the TC profile
As a TC-pattern seal it seals in two stages: a primary spring-loaded lip holds the oil film on the shaft, while a second lip fends off dust and water spray; the rubber-covered case keeps the whole unit anchored in the bore.
Material: NBR – Nitrile
Nitrile rubber (NBR) is the workhorse of oil sealing: fully compatible with mineral oils, lubricating greases and common hydraulic fluids — the media found in most gearboxes and motors. Avoid contact with brake fluid, and keep spares shaded from sunlight.
If your shaft measures a few tenths of a millimetre under the nominal size, that is normal — the sealing lip is designed with interference for exactly that.
Ordering & delivery
- Each listing is for one seal — no MOQ, all prices in US dollars.
- Import duties or taxes, if levied by your customs, are paid by the buyer and are not included in the price.
- Worldwide shipping at a single flat rate, with a tracking number emailed to you.
- To double-check the size, read how to measure an oil seal or contact us with your dimensions — size checks before purchase are free.
Reviews
There are no reviews yet.