The 35x70x8 mm Oil Seal 35x70x8 NBR TC keeps lubricant circulating where it belongs — inside the housing — on the 35 mm shafts and 70 mm bores typical of AC motors, worm gearboxes, gear pumps and harvest machinery.
Size and material details
| Inner diameter (shaft) | 35 mm |
| Outer diameter (bore) | 70 mm |
| Width | 8 mm |
| Seal type | TC — double lip, rubber covered, garter spring |
| Material | NBR – Nitrile |
| Temperature range | -30 °C … +100 °C |
Why the TC profile is so widely used
Every TC seal combines three elements: a rubber-covered case that grips the bore, a spring-loaded sealing lip that follows shaft runout, and a dust lip that shields the main lip from contamination.
Why NBR for this seal
NBR nitrile rubber gives the lip its resistance to mineral oils, greases and hydraulic fluids — exactly the fluids a gearbox or pump seal meet. It is the industry’s general-purpose choice; just keep it clear of brake fluid and direct sun when storing.
Measuring your shaft a few tenths under the nominal figure is expected; the spring-loaded lip is built to seal with that small interference.
Order details
- Every order is per piece with no MOQ; payments in US dollars.
- Prices exclude duties and taxes that your customs may assess — those are the buyer’s obligation.
- Flat worldwide shipping · email delivery of the tracking number.
- Double-check dimensions before ordering: how to measure an oil seal, or message us your size for a free check.
Reviews
There are no reviews yet.