If your 38 mm shaft is weeping oil, the Oil Seal 38x60x8 NBR TC — a TC spring-loaded seal at 38x60x8 mm — restores the barrier between the 60 mm housing and the outside world. A staple size for drive motors, planetary gearboxes, irrigation pumps and feed mixers.
Technical specifications
| Inner diameter (shaft) | 38 mm |
| Outer diameter (bore) | 60 mm |
| Width | 8 mm |
| Seal type | TC — double lip, rubber covered, garter spring |
| Material | NBR – Nitrile |
| Temperature range | -30 °C … +100 °C |
About the TC profile
As a TC-pattern seal it seals in two stages: a primary spring-loaded lip holds the oil film on the shaft, while a second lip fends off dust and water spray; the rubber-covered case keeps the whole unit anchored in the bore.
Why NBR for this seal
NBR (Nitrile) is the standard compound for general industrial sealing. It handles mineral oils, greases and hydraulic fluids, which is why it is the default choice in gearboxes, electric motors and pumps. Keep it away from brake fluid, and store spare seals out of direct sunlight.
Measuring your shaft a few tenths under the nominal figure is expected; the spring-loaded lip is built to seal with that small interference.
Purchase and delivery notes
- Sold per piece — no minimum order, priced in US dollars.
- Prices exclude any import duties or taxes; if your customs authority charges them, they are the buyer’s responsibility.
- One flat shipping rate worldwide · tracking number by email.
- To confirm this is the right size, see how to measure an oil seal, or send us your dimensions — pre-sale size checks are free.
Reviews
There are no reviews yet.