The Oil Seal 38x56x8 NBR TC is a TC rotary shaft seal sized 38x56x8 mm (ID × OD × width). It keeps oil inside and dirt outside on a 38 mm shaft seated in a 56 mm bore — a size common in drive motors, planetary gearboxes, irrigation pumps and feed mixers.
Dimensions & specifications
| Inner diameter (shaft) | 38 mm |
| Outer diameter (bore) | 56 mm |
| Width | 8 mm |
| Seal type | TC — double lip, rubber covered, garter spring |
| Material | NBR – Nitrile |
| Temperature range | -30 °C … +100 °C |
Inside the TC double-lip design
Its TC construction pairs a rubber-covered OD (a snug press-fit in the bore) with a spring-energised sealing lip and a separate dust lip, so both oil retention and contamination exclusion are covered.
Why NBR for this seal
Material-wise this is NBR nitrile: a balanced compound for mineral oil, diesel-range fuels and greases at moderate temperatures — ideal for rotating equipment. Two cautions: no exposure to glycol-based brake fluid, and keep stock seals out of sunlight.
Don’t worry if your micrometer shows the shaft a few tenths under size — the garter-sprung lip is designed to seal against exactly that condition.
Order details
- Every order is per piece with no MOQ; payments in US dollars.
- Prices exclude duties and taxes that your customs may assess — those are the buyer’s obligation.
- Flat worldwide shipping · email delivery of the tracking number.
- Double-check dimensions before ordering: how to measure an oil seal, or message us your size for a free check.
Reviews
There are no reviews yet.