For 38 mm shafts turning in 55 mm bores, the Oil Seal 38x55x7 NBR TC (38x55x7 mm, TC type, NBR) provides the tight, spring-assisted seal that drive motors, planetary gearboxes, irrigation pumps and feed mixers depend on.
Specifications
| Inner diameter (shaft) | 38 mm |
| Outer diameter (bore) | 55 mm |
| Width | 7 mm |
| Seal type | TC — double lip, rubber covered, garter spring |
| Material | NBR – Nitrile |
| Temperature range | -30 °C … +100 °C |
Inside the TC double-lip design
As a TC-pattern seal it seals in two stages: a primary spring-loaded lip holds the oil film on the shaft, while a second lip fends off dust and water spray; the rubber-covered case keeps the whole unit anchored in the bore.
About the NBR nitrile compound
The compound is NBR nitrile, selected for oil-and-grease compatibility across motors, reducers and pumps. Note the limits: brake fluid degrades nitrile, and sunlight ages stored rubber — so store spares dark and dry.
It is normal for a shaft to measure a few tenths of a millimetre smaller than nominal; the sealing lip is engineered to take up that difference.
Buying & shipping information
- Sold per piece — no minimum order, priced in US dollars.
- Prices exclude any import duties or taxes; if your customs authority charges them, they are the buyer’s responsibility.
- One flat shipping rate worldwide · tracking number by email.
- To confirm this is the right size, see how to measure an oil seal, or send us your dimensions — pre-sale size checks are free.
Reviews
There are no reviews yet.