The Oil Seal 52x75x8 NBR TC is a TC rotary shaft seal sized 52x75x8 mm (ID × OD × width). It keeps oil inside and dirt outside on a 52 mm shaft seated in a 75 mm bore — a size common in steel-plant gearboxes, screw conveyors and big-bore rotating shafts.
Dimensions & specifications
| Inner diameter (shaft) | 52 mm |
| Outer diameter (bore) | 75 mm |
| Width | 8 mm |
| Seal type | TC — double lip, rubber covered, garter spring |
| Material | NBR – Nitrile |
| Temperature range | -30 °C … +100 °C |
How the TC design works
Three features define the TC type: the rubber outer case that fills small bore imperfections, the garter-spring-loaded lip that maintains contact under runout, and the auxiliary lip that acts as a dirt barrier.
About the NBR nitrile compound
Material-wise this is NBR nitrile: a balanced compound for mineral oil, diesel-range fuels and greases at moderate temperatures — ideal for rotating equipment. Two cautions: no exposure to glycol-based brake fluid, and keep stock seals out of sunlight.
Should the shaft read slightly below the listed size — typically a few tenths of a millimetre — no concern: the lip’s interference fit accounts for it.
Purchase and delivery notes
- Sold per piece — no minimum order, priced in US dollars.
- Prices exclude any import duties or taxes; if your customs authority charges them, they are the buyer’s responsibility.
- One flat shipping rate worldwide · tracking number by email.
- To confirm this is the right size, see how to measure an oil seal, or send us your dimensions — pre-sale size checks are free.
Reviews
There are no reviews yet.