A 50x95x10 mm TC double-lip seal moulded in NBR nitrile rubber: the Oil Seal 50x95x10 NBR TC restores tight sealing on 50 mm shafts and 95 mm bores used in heavy-duty gearboxes, conveyor drums and large pump shafts.
Specifications
| Inner diameter (shaft) | 50 mm |
| Outer diameter (bore) | 95 mm |
| Width | 10 mm |
| Seal type | TC — double lip, rubber covered, garter spring |
| Material | NBR – Nitrile |
| Temperature range | -30 °C … +100 °C |
Why the TC profile is so widely used
Every TC seal combines three elements: a rubber-covered case that grips the bore, a spring-loaded sealing lip that follows shaft runout, and a dust lip that shields the main lip from contamination.
Material: NBR – Nitrile
This is an NBR-nitrile seal — the everyday elastomer for oil-lubricated equipment, compatible with mineral oils, greases and hydraulic media. For longest life, avoid brake fluid contact and store spares away from direct sunlight.
It is normal for a shaft to measure a few tenths of a millimetre smaller than nominal; the sealing lip is engineered to take up that difference.
Buying & shipping information
- Price is for 1 piece — order any quantity, no minimum; listed in US dollars.
- Any import duty or tax imposed by your country is the buyer’s responsibility and excluded from our prices.
- Flat-rate shipping to every country · tracking number sent by email.
- For a size check, How to measure an oil seal walks you through it, or send us your dimensions for free advice.
Reviews
There are no reviews yet.