The Oil Seal 32x62x8 NBR TC (32x62x8 mm) renews the sealing on a 32 mm shaft where grease or oil must stay in and grit must stay out — a typical fitment in AC motors, worm gearboxes, gear pumps and harvest machinery.
Technical specifications
| Inner diameter (shaft) | 32 mm |
| Outer diameter (bore) | 62 mm |
| Width | 8 mm |
| Seal type | TC — double lip, rubber covered, garter spring |
| Material | NBR – Nitrile |
| Temperature range | -30 °C … +100 °C |
How the TC design works
As a TC-pattern seal it seals in two stages: a primary spring-loaded lip holds the oil film on the shaft, while a second lip fends off dust and water spray; the rubber-covered case keeps the whole unit anchored in the bore.
Why NBR for this seal
NBR (Nitrile) is the standard compound for general industrial sealing. It handles mineral oils, greases and hydraulic fluids, which is why it is the default choice in gearboxes, electric motors and pumps. Keep it away from brake fluid, and store spare seals out of direct sunlight.
If your shaft measures a few tenths of a millimetre under the nominal size, that is normal — the sealing lip is designed with interference for exactly that.
Buying & shipping information
- Price is for 1 piece — order any quantity, no minimum; listed in US dollars.
- Any import duty or tax imposed by your country is the buyer’s responsibility and excluded from our prices.
- Flat-rate shipping to every country · tracking number sent by email.
- For a size check, How to measure an oil seal walks you through it, or send us your dimensions for free advice.
Reviews
There are no reviews yet.