Built to 34x52x10 mm (ID 34 / OD 52 / width 10), the Oil Seal 34x52x10 NBR TC gives 34 mm shafts a fresh, leak-free seal in the 52 mm housings of motor shafts, gearbox input stages, centrifugal pumps and tillers.
Dimensions & specifications
| Inner diameter (shaft) | 34 mm |
| Outer diameter (bore) | 52 mm |
| Width | 10 mm |
| Seal type | TC — double lip, rubber covered, garter spring |
| Material | NBR – Nitrile |
| Temperature range | -30 °C … +100 °C |
Inside the TC double-lip design
The TC layout brings three protections together: a rubber outer surface that grips the housing bore, a garter-spring lip that tracks slight shaft movement, and a secondary dust lip that blocks grit before it reaches the sealing edge.
NBR nitrile rubber at a glance
Material-wise this is NBR nitrile: a balanced compound for mineral oil, diesel-range fuels and greases at moderate temperatures — ideal for rotating equipment. Two cautions: no exposure to glycol-based brake fluid, and keep stock seals out of sunlight.
Don’t worry if your micrometer shows the shaft a few tenths under size — the garter-sprung lip is designed to seal against exactly that condition.
Order details
- Every order is per piece with no MOQ; payments in US dollars.
- Prices exclude duties and taxes that your customs may assess — those are the buyer’s obligation.
- Flat worldwide shipping · email delivery of the tracking number.
- Double-check dimensions before ordering: how to measure an oil seal, or message us your size for a free check.
Reviews
There are no reviews yet.