The Oil Seal 30x72x10 NBR TC combines a 30 × 72 × 10 mm envelope with the proven TC double-lip geometry, making it a dependable fix where electric motors, gearboxes, pumps and agricultural machinery need reliable shaft sealing.
Size and material details
| Inner diameter (shaft) | 30 mm |
| Outer diameter (bore) | 72 mm |
| Width | 10 mm |
| Seal type | TC — double lip, rubber covered, garter spring |
| Material | NBR – Nitrile |
| Temperature range | -30 °C … +100 °C |
About the TC profile
As a TC-pattern seal it seals in two stages: a primary spring-loaded lip holds the oil film on the shaft, while a second lip fends off dust and water spray; the rubber-covered case keeps the whole unit anchored in the bore.
Material: NBR – Nitrile
Nitrile rubber (NBR) is the workhorse of oil sealing: fully compatible with mineral oils, lubricating greases and common hydraulic fluids — the media found in most gearboxes and motors. Avoid contact with brake fluid, and keep spares shaded from sunlight.
If your shaft measures a few tenths of a millimetre under the nominal size, that is normal — the sealing lip is designed with interference for exactly that.
Ordering & delivery
- Individual pieces, no minimum order — checkout in US dollars.
- Our prices do not cover customs duties or taxes your country may apply; those fall to the buyer.
- One worldwide flat shipping fee · every parcel tracked, number emailed.
- Before you buy, confirm the fit: measuring guide or free dimension check.
Reviews
There are no reviews yet.