This TC oil seal measures 30x65x7 mm and is machined for a 30 mm shaft rotating inside a 65 mm housing — a dimension you will meet in motor shafts, gearbox input stages, centrifugal pumps and tillers.
Technical specifications
| Inner diameter (shaft) | 30 mm |
| Outer diameter (bore) | 65 mm |
| Width | 7 mm |
| Seal type | TC — double lip, rubber covered, garter spring |
| Material | NBR – Nitrile |
| Temperature range | -30 °C … +100 °C |
Why the TC profile is so widely used
The TC layout brings three protections together: a rubber outer surface that grips the housing bore, a garter-spring lip that tracks slight shaft movement, and a secondary dust lip that blocks grit before it reaches the sealing edge.
Why NBR for this seal
The seal lip is moulded from NBR, a nitrile rubber prized for resistance to mineral oil, grease and hydraulic fluids — the default elastomer for general machinery. It should not meet brake fluid, and stored spares fare best away from UV light.
Don’t worry if your micrometer shows the shaft a few tenths under size — the garter-sprung lip is designed to seal against exactly that condition.
Ordering & delivery
- Every order is per piece with no MOQ; payments in US dollars.
- Prices exclude duties and taxes that your customs may assess — those are the buyer’s obligation.
- Flat worldwide shipping · email delivery of the tracking number.
- Double-check dimensions before ordering: how to measure an oil seal, or message us your size for a free check.
Reviews
There are no reviews yet.