Built to 27x40x7 mm (ID 27 / OD 40 / width 7), the Oil Seal 27x40x7 NBR TC gives 27 mm shafts a fresh, leak-free seal in the 40 mm housings of motor shafts, gearbox input stages, centrifugal pumps and tillers.
Size and material details
| Inner diameter (shaft) | 27 mm |
| Outer diameter (bore) | 40 mm |
| Width | 7 mm |
| Seal type | TC — double lip, rubber covered, garter spring |
| Material | NBR – Nitrile |
| Temperature range | -30 °C … +100 °C |
Why the TC profile is so widely used
TC is the standard rotary-shaft profile for good reason: a rubber OD seals the bore side, a spring-loaded lip seals the shaft side, and a dust lip extends service life in dirty environments.
Why NBR for this seal
NBR nitrile rubber gives the lip its resistance to mineral oils, greases and hydraulic fluids — exactly the fluids a gearbox or pump seal meet. It is the industry’s general-purpose choice; just keep it clear of brake fluid and direct sun when storing.
Should the shaft read slightly below the listed size — typically a few tenths of a millimetre — no concern: the lip’s interference fit accounts for it.
Order details
- Individual pieces, no minimum order — checkout in US dollars.
- Our prices do not cover customs duties or taxes your country may apply; those fall to the buyer.
- One worldwide flat shipping fee · every parcel tracked, number emailed.
- Before you buy, confirm the fit: measuring guide or free dimension check.
Reviews
There are no reviews yet.