The right 22x35x8 shaft seal for the job: the Oil Seal 22x35x8 NBR TC is a spring-loaded TC lip seal, 22x35x8 mm, in oil-resistant NBR nitrile — built for 22 mm shafts and 35 mm bores found in small electric motors, power tools, pumps and instrument gearboxes.
Dimensions & specifications
| Inner diameter (shaft) | 22 mm |
| Outer diameter (bore) | 35 mm |
| Width | 8 mm |
| Seal type | TC — double lip, rubber covered, garter spring |
| Material | NBR – Nitrile |
| Temperature range | -30 °C … +100 °C |
How the TC design works
As a TC-pattern seal it seals in two stages: a primary spring-loaded lip holds the oil film on the shaft, while a second lip fends off dust and water spray; the rubber-covered case keeps the whole unit anchored in the bore.
About the NBR nitrile compound
The compound is NBR nitrile, selected for oil-and-grease compatibility across motors, reducers and pumps. Note the limits: brake fluid degrades nitrile, and sunlight ages stored rubber — so store spares dark and dry.
Should the shaft read slightly below the listed size — typically a few tenths of a millimetre — no concern: the lip’s interference fit accounts for it.
Order details
- Every order is per piece with no MOQ; payments in US dollars.
- Prices exclude duties and taxes that your customs may assess — those are the buyer’s obligation.
- Flat worldwide shipping · email delivery of the tracking number.
- Double-check dimensions before ordering: how to measure an oil seal, or message us your size for a free check.
Reviews
There are no reviews yet.