Sized 28x47x10 mm (inner × outer × width), the Oil Seal 28x47x10 NBR TC seals a 28 mm shaft running in a 47 mm bore. This size turns up often in AC motors, worm gearboxes, gear pumps and harvest machinery.
Dimensions & specifications
| Inner diameter (shaft) | 28 mm |
| Outer diameter (bore) | 47 mm |
| Width | 10 mm |
| Seal type | TC — double lip, rubber covered, garter spring |
| Material | NBR – Nitrile |
| Temperature range | -30 °C … +100 °C |
Why the TC profile is so widely used
Every TC seal combines three elements: a rubber-covered case that grips the bore, a spring-loaded sealing lip that follows shaft runout, and a dust lip that shields the main lip from contamination.
About the NBR nitrile compound
NBR nitrile rubber gives the lip its resistance to mineral oils, greases and hydraulic fluids — exactly the fluids a gearbox or pump seal meet. It is the industry’s general-purpose choice; just keep it clear of brake fluid and direct sun when storing.
Measuring your shaft a few tenths under the nominal figure is expected; the spring-loaded lip is built to seal with that small interference.
Ordering & delivery
- Sold per piece — no minimum order, priced in US dollars.
- Prices exclude any import duties or taxes; if your customs authority charges them, they are the buyer’s responsibility.
- One flat shipping rate worldwide · tracking number by email.
- To confirm this is the right size, see how to measure an oil seal, or send us your dimensions — pre-sale size checks are free.
Reviews
There are no reviews yet.