The Oil Seal 42x65x12 NBR TC (42x65x12 mm) renews the sealing on a 42 mm shaft where grease or oil must stay in and grit must stay out — a typical fitment in workshop motors, helical gearboxes, vane pumps and tractor attachments.
Size and material details
| Inner diameter (shaft) | 42 mm |
| Outer diameter (bore) | 65 mm |
| Width | 12 mm |
| Seal type | TC — double lip, rubber covered, garter spring |
| Material | NBR – Nitrile |
| Temperature range | -30 °C … +100 °C |
How the TC design works
Its TC construction pairs a rubber-covered OD (a snug press-fit in the bore) with a spring-energised sealing lip and a separate dust lip, so both oil retention and contamination exclusion are covered.
Material: NBR – Nitrile
The seal lip is moulded from NBR, a nitrile rubber prized for resistance to mineral oil, grease and hydraulic fluids — the default elastomer for general machinery. It should not meet brake fluid, and stored spares fare best away from UV light.
If your shaft measures a few tenths of a millimetre under the nominal size, that is normal — the sealing lip is designed with interference for exactly that.
Purchase and delivery notes
- Price is for 1 piece — order any quantity, no minimum; listed in US dollars.
- Any import duty or tax imposed by your country is the buyer’s responsibility and excluded from our prices.
- Flat-rate shipping to every country · tracking number sent by email.
- For a size check, How to measure an oil seal walks you through it, or send us your dimensions for free advice.
Reviews
There are no reviews yet.