A 45x65x10 mm TC double-lip seal moulded in NBR nitrile rubber: the Oil Seal 45x65x10 NBR TC restores tight sealing on 45 mm shafts and 65 mm bores used in large reducers, belt-conveyor pulleys, slurry pumps and construction machinery.
Dimensions & specifications
| Inner diameter (shaft) | 45 mm |
| Outer diameter (bore) | 65 mm |
| Width | 10 mm |
| Seal type | TC — double lip, rubber covered, garter spring |
| Material | NBR – Nitrile |
| Temperature range | -30 °C … +100 °C |
Inside the TC double-lip design
TC seals work with a triple defence — a rubber-coated case seating tightly in the bore, a main lip held against the shaft by a garter spring, and an outer dust lip that keeps abrasive particles away.
Material: NBR – Nitrile
Material-wise this is NBR nitrile: a balanced compound for mineral oil, diesel-range fuels and greases at moderate temperatures — ideal for rotating equipment. Two cautions: no exposure to glycol-based brake fluid, and keep stock seals out of sunlight.
Should the shaft read slightly below the listed size — typically a few tenths of a millimetre — no concern: the lip’s interference fit accounts for it.
Ordering & delivery
- Sold per piece — no minimum order, priced in US dollars.
- Prices exclude any import duties or taxes; if your customs authority charges them, they are the buyer’s responsibility.
- One flat shipping rate worldwide · tracking number by email.
- To confirm this is the right size, see how to measure an oil seal, or send us your dimensions — pre-sale size checks are free.
Reviews
There are no reviews yet.