For 45 mm shafts turning in 64 mm bores, the Oil Seal 45x64x8 NBR TC (45x64x8 mm, TC type, NBR) provides the tight, spring-assisted seal that industrial gearboxes, conveyors and mid-size rotating equipment depend on.
Specifications
| Inner diameter (shaft) | 45 mm |
| Outer diameter (bore) | 64 mm |
| Width | 8 mm |
| Seal type | TC — double lip, rubber covered, garter spring |
| Material | NBR – Nitrile |
| Temperature range | -30 °C … +100 °C |
Why the TC profile is so widely used
TC is the standard rotary-shaft profile for good reason: a rubber OD seals the bore side, a spring-loaded lip seals the shaft side, and a dust lip extends service life in dirty environments.
Material: NBR – Nitrile
Nitrile rubber (NBR) is the workhorse of oil sealing: fully compatible with mineral oils, lubricating greases and common hydraulic fluids — the media found in most gearboxes and motors. Avoid contact with brake fluid, and keep spares shaded from sunlight.
It is normal for a shaft to measure a few tenths of a millimetre smaller than nominal; the sealing lip is engineered to take up that difference.
Order details
- Every order is per piece with no MOQ; payments in US dollars.
- Prices exclude duties and taxes that your customs may assess — those are the buyer’s obligation.
- Flat worldwide shipping · email delivery of the tracking number.
- Double-check dimensions before ordering: how to measure an oil seal, or message us your size for a free check.
Reviews
There are no reviews yet.