Replace the worn seal on a 55 mm shaft with the Oil Seal 55x85x12 NBR TC — 55x85x12 mm, TC profile, NBR compound — it drops into a 85 mm bore and stops the leak. Popular in large reducers, belt-conveyor pulleys, slurry pumps and construction machinery.
Size and material details
| Inner diameter (shaft) | 55 mm |
| Outer diameter (bore) | 85 mm |
| Width | 12 mm |
| Seal type | TC — double lip, rubber covered, garter spring |
| Material | NBR – Nitrile |
| Temperature range | -30 °C … +100 °C |
How the TC design works
The TC layout brings three protections together: a rubber outer surface that grips the housing bore, a garter-spring lip that tracks slight shaft movement, and a secondary dust lip that blocks grit before it reaches the sealing edge.
About the NBR nitrile compound
Made of NBR (acrylonitrile-butadiene rubber), the seal tolerates the mineral oils and lithium greases that lubricate most machinery. Standard practice: keep NBR away from brake fluid, and store unused seals in their bag, out of sunlight.
Should the shaft read slightly below the listed size — typically a few tenths of a millimetre — no concern: the lip’s interference fit accounts for it.
Buying & shipping information
- Sold individually — buy one or one hundred, all prices in USD.
- Where customs charges duties or taxes on entry, the buyer covers them; they are not part of our pricing.
- Ships worldwide at one flat rate · tracking number provided by email.
- For sizing help, use how to measure an oil seal or send us your dimensions — free pre-sale checks.
Reviews
There are no reviews yet.