The 55x72x12 mm Oil Seal 55x72x12 NBR TC keeps lubricant circulating where it belongs — inside the housing — on the 55 mm shafts and 72 mm bores typical of steel-plant gearboxes, screw conveyors and big-bore rotating shafts.
Technical specifications
| Inner diameter (shaft) | 55 mm |
| Outer diameter (bore) | 72 mm |
| Width | 12 mm |
| Seal type | TC — double lip, rubber covered, garter spring |
| Material | NBR – Nitrile |
| Temperature range | -30 °C … +100 °C |
About the TC profile
TC is the standard rotary-shaft profile for good reason: a rubber OD seals the bore side, a spring-loaded lip seals the shaft side, and a dust lip extends service life in dirty environments.
Why NBR for this seal
NBR (Nitrile) is the standard compound for general industrial sealing. It handles mineral oils, greases and hydraulic fluids, which is why it is the default choice in gearboxes, electric motors and pumps. Keep it away from brake fluid, and store spare seals out of direct sunlight.
Should the shaft read slightly below the listed size — typically a few tenths of a millimetre — no concern: the lip’s interference fit accounts for it.
Purchase and delivery notes
- Price is for 1 piece — order any quantity, no minimum; listed in US dollars.
- Any import duty or tax imposed by your country is the buyer’s responsibility and excluded from our prices.
- Flat-rate shipping to every country · tracking number sent by email.
- For a size check, How to measure an oil seal walks you through it, or send us your dimensions for free advice.
Reviews
There are no reviews yet.