A 40x95x10 mm TC double-lip seal moulded in NBR nitrile rubber: the Oil Seal 40x95x10 NBR TC restores tight sealing on 40 mm shafts and 95 mm bores used in electric motors, gearboxes, pumps and agricultural machinery.
Technical specifications
| Inner diameter (shaft) | 40 mm |
| Outer diameter (bore) | 95 mm |
| Width | 10 mm |
| Seal type | TC — double lip, rubber covered, garter spring |
| Material | NBR – Nitrile |
| Temperature range | -30 °C … +100 °C |
About the TC profile
TC is the standard rotary-shaft profile for good reason: a rubber OD seals the bore side, a spring-loaded lip seals the shaft side, and a dust lip extends service life in dirty environments.
Material: NBR – Nitrile
The seal lip is moulded from NBR, a nitrile rubber prized for resistance to mineral oil, grease and hydraulic fluids — the default elastomer for general machinery. It should not meet brake fluid, and stored spares fare best away from UV light.
Should the shaft read slightly below the listed size — typically a few tenths of a millimetre — no concern: the lip’s interference fit accounts for it.
Order details
- Individual pieces, no minimum order — checkout in US dollars.
- Our prices do not cover customs duties or taxes your country may apply; those fall to the buyer.
- One worldwide flat shipping fee · every parcel tracked, number emailed.
- Before you buy, confirm the fit: measuring guide or free dimension check.
Reviews
There are no reviews yet.