If your 40 mm shaft is weeping oil, the Oil Seal 40x90x8 NBR TC — a TC spring-loaded seal at 40x90x8 mm — restores the barrier between the 90 mm housing and the outside world. A staple size for drive motors, planetary gearboxes, irrigation pumps and feed mixers.
Specifications
| Inner diameter (shaft) | 40 mm |
| Outer diameter (bore) | 90 mm |
| Width | 8 mm |
| Seal type | TC — double lip, rubber covered, garter spring |
| Material | NBR – Nitrile |
| Temperature range | -30 °C … +100 °C |
Inside the TC double-lip design
As a TC-pattern seal it seals in two stages: a primary spring-loaded lip holds the oil film on the shaft, while a second lip fends off dust and water spray; the rubber-covered case keeps the whole unit anchored in the bore.
NBR nitrile rubber at a glance
The seal lip is moulded from NBR, a nitrile rubber prized for resistance to mineral oil, grease and hydraulic fluids — the default elastomer for general machinery. It should not meet brake fluid, and stored spares fare best away from UV light.
Measuring your shaft a few tenths under the nominal figure is expected; the spring-loaded lip is built to seal with that small interference.
Ordering & delivery
- Every order is per piece with no MOQ; payments in US dollars.
- Prices exclude duties and taxes that your customs may assess — those are the buyer’s obligation.
- Flat worldwide shipping · email delivery of the tracking number.
- Double-check dimensions before ordering: how to measure an oil seal, or message us your size for a free check.
Reviews
There are no reviews yet.