Built to 40x85x12 mm (ID 40 / OD 85 / width 12), the Oil Seal 40x85x12 NBR TC gives 40 mm shafts a fresh, leak-free seal in the 85 mm housings of AC motors, worm gearboxes, gear pumps and harvest machinery.
Specifications
| Inner diameter (shaft) | 40 mm |
| Outer diameter (bore) | 85 mm |
| Width | 12 mm |
| Seal type | TC — double lip, rubber covered, garter spring |
| Material | NBR – Nitrile |
| Temperature range | -30 °C … +100 °C |
Why the TC profile is so widely used
Three features define the TC type: the rubber outer case that fills small bore imperfections, the garter-spring-loaded lip that maintains contact under runout, and the auxiliary lip that acts as a dirt barrier.
Material: NBR – Nitrile
This is an NBR-nitrile seal — the everyday elastomer for oil-lubricated equipment, compatible with mineral oils, greases and hydraulic media. For longest life, avoid brake fluid contact and store spares away from direct sunlight.
Measuring your shaft a few tenths under the nominal figure is expected; the spring-loaded lip is built to seal with that small interference.
Ordering & delivery
- Sold per piece — no minimum order, priced in US dollars.
- Prices exclude any import duties or taxes; if your customs authority charges them, they are the buyer’s responsibility.
- One flat shipping rate worldwide · tracking number by email.
- To confirm this is the right size, see how to measure an oil seal, or send us your dimensions — pre-sale size checks are free.
Reviews
There are no reviews yet.