If your 40 mm shaft is weeping oil, the Oil Seal 40x72x7 NBR TC — a TC spring-loaded seal at 40x72x7 mm — restores the barrier between the 72 mm housing and the outside world. A staple size for workshop motors, helical gearboxes, vane pumps and tractor attachments.
Dimensions & specifications
| Inner diameter (shaft) | 40 mm |
| Outer diameter (bore) | 72 mm |
| Width | 7 mm |
| Seal type | TC — double lip, rubber covered, garter spring |
| Material | NBR – Nitrile |
| Temperature range | -30 °C … +100 °C |
Inside the TC double-lip design
TC is the standard rotary-shaft profile for good reason: a rubber OD seals the bore side, a spring-loaded lip seals the shaft side, and a dust lip extends service life in dirty environments.
NBR nitrile rubber at a glance
Material-wise this is NBR nitrile: a balanced compound for mineral oil, diesel-range fuels and greases at moderate temperatures — ideal for rotating equipment. Two cautions: no exposure to glycol-based brake fluid, and keep stock seals out of sunlight.
Should the shaft read slightly below the listed size — typically a few tenths of a millimetre — no concern: the lip’s interference fit accounts for it.
Purchase and delivery notes
- Sold per piece — no minimum order, priced in US dollars.
- Prices exclude any import duties or taxes; if your customs authority charges them, they are the buyer’s responsibility.
- One flat shipping rate worldwide · tracking number by email.
- To confirm this is the right size, see how to measure an oil seal, or send us your dimensions — pre-sale size checks are free.
Reviews
There are no reviews yet.