Built to 35x60x10 mm (ID 35 / OD 60 / width 10), the Oil Seal 35x60x10 NBR TC gives 35 mm shafts a fresh, leak-free seal in the 60 mm housings of industrial motors, speed reducers, hydraulic pumps and farm equipment.
Technical specifications
| Inner diameter (shaft) | 35 mm |
| Outer diameter (bore) | 60 mm |
| Width | 10 mm |
| Seal type | TC — double lip, rubber covered, garter spring |
| Material | NBR – Nitrile |
| Temperature range | -30 °C … +100 °C |
Why the TC profile is so widely used
Its TC construction pairs a rubber-covered OD (a snug press-fit in the bore) with a spring-energised sealing lip and a separate dust lip, so both oil retention and contamination exclusion are covered.
Material: NBR – Nitrile
Made of NBR (acrylonitrile-butadiene rubber), the seal tolerates the mineral oils and lithium greases that lubricate most machinery. Standard practice: keep NBR away from brake fluid, and store unused seals in their bag, out of sunlight.
Measuring your shaft a few tenths under the nominal figure is expected; the spring-loaded lip is built to seal with that small interference.
Buying & shipping information
- Every order is per piece with no MOQ; payments in US dollars.
- Prices exclude duties and taxes that your customs may assess — those are the buyer’s obligation.
- Flat worldwide shipping · email delivery of the tracking number.
- Double-check dimensions before ordering: how to measure an oil seal, or message us your size for a free check.
Reviews
There are no reviews yet.