Replace the worn seal on a 35 mm shaft with the Oil Seal 35x58x12 NBR TC — 35x58x12 mm, TC profile, NBR compound — it drops into a 58 mm bore and stops the leak. Popular in motor shafts, gearbox input stages, centrifugal pumps and tillers.
Technical specifications
| Inner diameter (shaft) | 35 mm |
| Outer diameter (bore) | 58 mm |
| Width | 12 mm |
| Seal type | TC — double lip, rubber covered, garter spring |
| Material | NBR – Nitrile |
| Temperature range | -30 °C … +100 °C |
Why the TC profile is so widely used
TC is the standard rotary-shaft profile for good reason: a rubber OD seals the bore side, a spring-loaded lip seals the shaft side, and a dust lip extends service life in dirty environments.
Material: NBR – Nitrile
Nitrile rubber (NBR) is the workhorse of oil sealing: fully compatible with mineral oils, lubricating greases and common hydraulic fluids — the media found in most gearboxes and motors. Avoid contact with brake fluid, and keep spares shaded from sunlight.
If your shaft measures a few tenths of a millimetre under the nominal size, that is normal — the sealing lip is designed with interference for exactly that.
Ordering & delivery
- Individual pieces, no minimum order — checkout in US dollars.
- Our prices do not cover customs duties or taxes your country may apply; those fall to the buyer.
- One worldwide flat shipping fee · every parcel tracked, number emailed.
- Before you buy, confirm the fit: measuring guide or free dimension check.
Reviews
There are no reviews yet.