Engineered as a direct replacement, the Oil Seal 35x48x10 NBR TC (35x48x10 mm) seals 35 mm shafts against dust and moisture from the moment it seats in the 48 mm bore — common in AC motors, worm gearboxes, gear pumps and harvest machinery.
Dimensions & specifications
| Inner diameter (shaft) | 35 mm |
| Outer diameter (bore) | 48 mm |
| Width | 10 mm |
| Seal type | TC — double lip, rubber covered, garter spring |
| Material | NBR – Nitrile |
| Temperature range | -30 °C … +100 °C |
How the TC design works
As a TC-pattern seal it seals in two stages: a primary spring-loaded lip holds the oil film on the shaft, while a second lip fends off dust and water spray; the rubber-covered case keeps the whole unit anchored in the bore.
Material: NBR – Nitrile
The compound is NBR nitrile, selected for oil-and-grease compatibility across motors, reducers and pumps. Note the limits: brake fluid degrades nitrile, and sunlight ages stored rubber — so store spares dark and dry.
Measuring your shaft a few tenths under the nominal figure is expected; the spring-loaded lip is built to seal with that small interference.
Buying & shipping information
- Price is for 1 piece — order any quantity, no minimum; listed in US dollars.
- Any import duty or tax imposed by your country is the buyer’s responsibility and excluded from our prices.
- Flat-rate shipping to every country · tracking number sent by email.
- For a size check, How to measure an oil seal walks you through it, or send us your dimensions for free advice.
Reviews
There are no reviews yet.